Watchguard Firebox II
From DD-WRT Wiki
Introduction:
The Watchguard Firebox series are usually based on standard x86 processors, so this information may apply to a wider variety of Watchguard routers. Even though this guide is intended for the Firebox II, it also applies to the Firebox III and Firebox 700 as well, due to similar hardware designs. In this guide, I assume that you have some basic knowledge of DD-WRT and that you are familiar with the Watchguard Firebox II. This guide has been put together with hands on experience with these routers, but I make no guarantee that it will work for you.
Recent Comments